Unitech HT580 Bedienungsanleitung PDF herunterladen (Seite 37)

Calling from a Terminal

Currently, the HT580 can support dialing the modem from the rmware. EasyJob will

provide modem functionality in the future.

On the PC side, you can use MultiEJ or similar software to AutoAnswer. To do this,

place the HT580 into the cradle and connect the phone line. Then, follow the steps

below:

• Execute Setting Modem Phone and

input the correct phone number

• Then, execute Setting Modem Dial out, to connect to remote device

To stop communication, execute Setting Modem Hang, to hang up phone.

Updating Firmware

Unitech provides rmware as a zip le, which is named as “HT580Vx.xx.zip”. There are

8 les needed to complete the update: “bank0.bin” through “bank7.bin”.

You can get the latest rmware image from your supplier or contact Unitech directly.

Firmware will be in a compressed zip le. You can use the MultiEJ to download those 8

les into the HT580. After the 8 les have been download into HT580, execute HT580’s

Setting Supervisor SYS and then select 3.UPDATE F/W. The HT580 will auto-

matically update the rmware and cold start terminal.

Make sure the unit is charging while the update is in process to ensure the update

completes successfully. Please refer to the section “Communication” for more detailed

information to transfer les to the HT580 from a PC.

Chapter 3 Communication

1 2 ... 32 33 34 35 36 37

Keine Kommentare

Unitech HT580 Bedienungsanleitung Seite 37