Unitech MS860G Spezifikationen PDF herunterladen (Seite 21)

MS860G WiFi Manual 17

WiFi NETWORK SETTINGS

2.3 Configure by web server

Step 1. Make sure ones PC is located on the same subnet as

SW1601T.

Step 2. Open a web browser, then enter in the IP address of

SW1601T to be configured.

Note: Default user name is admin and default password is

password.

Step3. SW1601T’s network, Basic Setup、Radio、Security and

RS232 Setup settings should be configured in different

web pages.

Step.4. Click “Apply” button to save settings and make the

change effective.

GLOSSARY

IP Address

IP Address (short for Internet Protocol) is simply four

numbers (like 192.168.1.250) separated by periods that is

used to identify a particular device within a network, just as

an employee number is used to identify an individual

person within a company.

The IP Address can either be automatically assigned by

the wireless network or manually assigned by the user.

The automatically assigned IP Address is available via

your AP software, or you can assign your own IP Address

and see if it’s accepted by the network.

IP Subnet Mask

IP Subnet Mask is like the IP Address for the entire

network. Every device within a network shares the same

IP Subnet Mask. The IP Subnet Mask number is available

via your AP software.

Gateway IP Address

The Gateway IP Address is only necessary if your network

has outside access, as in a WAN (Wide Area Network).

Because of the security issues involved in outside access,

the Gateway IP Address is only available from your

Network Administrator or Service Provider.

SSID

SSID (Service Set ID) is the name of the wireless Access

Point you choose for your MS860G to communicate with.

Available via your AP software.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 80 81

Keine Kommentare

Unitech MS860G Spezifikationen Seite 21