Unitech MS842P Bedienungsanleitung PDF herunterladen (Seite 23)

Note:

If you tend to operate off line for long time, please set the scanner to the inventory

mode. Otherwise, the data stored in the RAM will be lost when the scanner runs out

of battery power.

Inventory Mode

Inventory Mode is the mode I n which the scanner keeps the scanned data in its

memory buffer but not send out the data on the host automatically; you should scan

Read Buffer barcode to order the scanner sent out the memorized data to the Host.

To set the scanner to the Inventory Mode, scan the following barcodes in the order:

Inventory Mode

Bear in mind the fact that the scanner operating in the inventory mode does not

send out the scanned data automatically but keeps the data in its memory buffer. If

you want to make the scanner output the data it scanned before, please scan the

Read Buffer barcode as shown below:

Read Buffer

Note: After scanning the Read Buffer barcode, the data is sent from the memory

buffer.

If you do not output the barcode data, the barcode data is always kept in the

memory buffer. When being outputted, the 1D data is erased from the memory

buffer. However, when being outputted, the 2D data is still kept in the memory

buffer, and thus if you want to erase the 2D data from the memory buffer, scan the

following barcodes in the order.

Enter Inventory Buffer Erase Erase

If you are out of range of the cradle or the host PC when reading out the scanned

data, the scanner will keep the data in its memory buffer until the buffer is full; only

when the scanner is within the specified range of the cradle or the host, and you

scan the Read Buffer barcode the data will be sent.

When the buffer is disabled and the scanner is out of range, the scanner will

respond with one long beep (low tone) and its LED indicator will become solid red

and go off quickly. You are advised to get back to range.

Buffer Mode Disable

To disable the buffer mode, scan the bar code below.

Buffer Mode Disable

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 98 99

Keine Kommentare

Unitech MS842P Bedienungsanleitung Seite 23