Unitech Hand Held Scanner Bedienungsanleitung PDF herunterladen (Seite 9)

Unitech electronics co., ltd.

5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)



Tel: + 886 2 89121122



Fax: +886 2 89121810



website: www.ute.com

Chapter 2

Installation and Connection

Connecting (Pairing) the Scanner to a Host PC

Please make sure your PC or Smart Phone has a built-in wireless adaptor; the MS910

supports both HID and SPP wireless profiles. If you are connecting it to an iOS (Apple) smart

phone, please follow the instruction of “Connecting via Human Interface Device (HID) Mode”; if

you are connecting it to an Android smart phone, please follow the instruction of “Connecting

via Serial Port Profile (SPP) Mode”

Connecting via Serial Port Profile (SPP) Mode

1. Turn on the wireless device on your host.

2. Scan [Disconnect] barcode.

3. Press the trigger for 1 second to activate the scanner.

SPP

4. Scan the [SPP] barcode below:

5. The scanner will emit 8 beeps.

6. Conduct a search for the MS910 on your host. Select “Wireless Scanner” from discovered

device list and the scanner will beep twice.

7. Enter pincode, which is “1234” by default.

8. Open serial communication software with com port (see Device Manager) properly set up.

9. The scanner will beep twice and the indicator LED will turn off to verify the successful

connection.

Connecting via Human Interface Device (HID) Mode

1. Turn on the wireless device on your host.

2. Scan [Disconnect] barcode.

3. Press the trigger for 1 second to activate the scanner.

4. Scan the [HID] barcode below:

HID

5. The scanner will emit 8 beeps.

6. Conduct a search for the MS910 on your host PC. Select “Wireless Scanner” from

discovered device list and the scanner will beep twice.

7. The wireless application may prompt you to scan a pincode it generated.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 40 41

Keine Kommentare

Unitech Hand Held Scanner Bedienungsanleitung Seite 9