Unitech MS860 Bedienungsanleitung PDF herunterladen (Seite 55)

MS860 WiFi Manual

SCANNER CONFIGURATION MANAGER

Bar Code Symbologies, continued

UPC-A

Enabled toggles the ability for the scanner to read UPC-A on or off.

Default is “Yes”.

Code ID is a user-definable identification letter for UPC-A, which is

referred to in the “Use Code ID” function on page 45.

Default is letter “A”.

Send Leading Digit toggles sending or not sending a leading

(‘start bar code’) digit.

Default is “Send”.

Send Check Digit toggles sending or not sending a check digit.

Default is “Send”.

Codabar

Enabled toggles the ability for the scanner to read Codabar on or off.

Default is “Yes”.

CLSI Format deletes the start and stop sentinels, and outputs the

data with spaces inserted after the 1st, 5th, and 10th characters.

Default is “No”.

Check Digit defines whether or not a check digit (to insure data

accuracy) is calculated, and if so, whether it should be sent or not.

Default is “Not Calculate”.

Send Start/Stop toggles sending or not sending start/stop sentinels.

Default is “No Send”.

Minimum Length defines the minimum length the user will accept

for a valid bar code.

Default is “3”.

Maximum Length defines the maximum length the user will accept

for a valid bar code.

Default is “48”.

Code ID is a user-definable identification letter for Codabar, which is

referred to in the “Use Code ID” function on page 45.

Default is letter “N”.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 95 96

Keine Kommentare

Unitech MS860 Bedienungsanleitung Seite 55